www.nws.noaa.gov | www.nws.noaa.gov |
 |
 |
 |
|
 |
 |
Site Map | News | Organization |  |
| Service
Hydrologist Information Management System 1. Introduction 2. Background 3. Hardware/Software Configuration 4. Upgrade Installation Steps 5. Starting SHIMS 6. Viewing the Forecast Point Summary Display 7. Viewing and Editing Forms 7.1.1 Location Form - Page 1 7.1.2 Location Form - Page 2 7.2.1 River Gage Form - Page 1 7.2.2 River Gage Form - Page 2 7.3.1 Forecast Point Form - Page 1 7.3.2 Forecast Point Form - Page 2 7.3.3 Forecast Point Form - Page 3 7.4 Reservoir Form 7.5 RiverPro Form 7.6 Site-Specific Form 8. Viewing and Editing Tables 9. Generating Reports 10. Running Utilities 11. Exiting SHIMS 12. Trouble Shooting APPENDICES A. Data Field Descriptions I. Main Screen II. Summary Screen III. Location Form IV. River Gage Form V. Forecast Point Form VI. Reservoir Form VII. RiverPro Form VIII. Site-Specific Form B. Valid Entries for Select Fields C. Sample Reports D. Sample RiverPro Product E. SHIMS Database Structure F. SHIMS Files |
I. Main Screen
The Main screen in SHIMS contains a list of stations in the SHIMS database,
and for each station, there is some associated information also listed. The
following fields are displayed:
1 Location
NWS location identifier. All information is defined for a given location.
2 Name
Name of the location. Refer to the Name field in the Location Form, Page 1.
3 Detail
Distance and direction from the post office. Refer to the Detail field in the
Location Form, Page 1.
4 County
County in which the location is located. Refer to the County field in the Location Form, Page 1.
5 Basin
Basin in which the location is contained. Refer to the Basin field in the Location Form, Page 1.
6 Type
Type of station. Refer to the Type field in Location Form, Page 1.
|
||||||
|
|||||||