![]() |
![]() |
||
![]() |
| Site Map | News | Organization |
| Service
Hydrologist Information Management System 1. Introduction 2. Background 3. Hardware/Software Configuration 4. Upgrade Installation Steps 5. Starting SHIMS 6. Viewing the Forecast Point Summary Display 7. Viewing and Editing Forms 7.1.1 Location Form - Page 1 7.1.2 Location Form - Page 2 7.2.1 River Gage Form - Page 1 7.2.2 River Gage Form - Page 2 7.3.1 Forecast Point Form - Page 1 7.3.2 Forecast Point Form - Page 2 7.3.3 Forecast Point Form - Page 3 7.4 Reservoir Form 7.5 RiverPro Form 7.6 Site-Specific Form 8. Viewing and Editing Tables 9. Generating Reports 10. Running Utilities 11. Exiting SHIMS 12. Trouble Shooting APPENDICES A. Data Field Descriptions I. Main Screen II. Summary Screen III. Location Form IV. River Gage Form V. Forecast Point Form VI. Reservoir Form VII. RiverPro Form VIII. Site-Specific Form B. Valid Entries for Select Fields C. Sample Reports D. Sample RiverPro Product E. SHIMS Database Structure F. SHIMS Files |
VIII. Site-Specific Form
Site-Specific Form (Forecast Point)
1 Location (Rating.Lid) Alphanumeric 8
NWS location identifier.
2 UHG Duration (Rvrsta.Uhgdur) Numeric
Duration in hours for which the unit hydrograph applies. Typical values are 1, 3, and 6 hours.
Site-Specific Form (Rating Table)
3 Stage (Rating.Stage) Numeric
The stage given in feet at which the associated flow values are given. The stage values are
associated with a corresponding flow value, given as described below. Multiple pairs of stage-flow
values are given to form a rating table.
4 Flow (Rating.Discharge) Numeric
The flow in CFS for the associated stage.
Site-Specific Form (Unitgraph)
5 Time (Uhg.Timinit) Numeric
The offset for the particular stage-discharge combination from the 0 hour associated with the start
of the precipitation event to which this unit hydrograph applies. This value should be a multiple of
the unit hydrograph duration (i.e. 3 hour, 6 hour). For example, for a 6-hour duration, the values
for successive entries in the unit hydrograph table would be 0, 6, 12, 18, 24, 30, etc.
The time offset values are given for a corresponding discharge value, as described below. Multiple
pairs of stage-discharge values are given to form a unit hydrograph table.
6 Q (Uhg.Q) Numeric
The discharge in CFS for the associated time offset in the unit hydrograph.
|
||||||
|
|||||||