.E Format:

Underlined fields are mandatory.

Location Id: Location ID, most often NWSLI.

Date: mmdd or yymmdd.

Time Zone: Defaults to Z (Zulu) - Otherwise use code from table 6.

Obs Time: Usually DHhhmm or DHhh. For example DH0630 or DH06. If minutes are not specified, defaults to 00.

Creation Date: DCyymmddhhnn where mmdd are the only required fields. Refer to the SHEF handbook for defaults and more details.

Units Code: DUE or DUS - (English or Standard international). The default is English.

Data String Quality: DQq - Refer to the SHEF Handbook for more details.

Duration Code Var: DV - For example, to code 9 hour pcpn: DVH9. Refer to SHEF Handbook tables 11a and 11b for more details and other codes.

Parameter Code:

PE - Physical Element - See table 1 for an abbreviated version of the table in the SHEF Handbook. This is the only portion of the PEDSEP that is mandatory.

D - Duration code - See table 2.

T - Type or basic category of the data: Forecast - F, Historical - H, Observed - R, Processed - P, Contingency - C.

S - Source Code which further refines the type code.

Table 3 shows some of the options available for TS.

E - Extremum code (daily max, daily min, etc..) Table 4 list all the options for the extremum code.

P - Probability code (Table 5). Rarely used.

Time Interval: DIt is used to define the time interval between values. A list of these codes is in table 6.

Data Elements: vvv/vvvq/.. These are the values in decimals, or

integers. Use of + and - is recognized. The q is

the qualifier, which is optional. Refer to SHEF

Handbook for more details.

Comment: Comments follow a colon (:) at the end of a line. To insert comments in the line of SHEF code, the comments must be preceded and followed by a colon (:).