NOUS41 KWBC 171804 AAA

PNSWSH

Technical Implementation Notice 11-16, Amended

National Weather Service Headquarters Washington DC

203 PM EDT Fri Jun 17 2011

To: Subscribers:

-Family of Services

-NOAA Weather Wire Service

-Emergency Managers Weather Information Network

-NOAAPORT

Other NWS Partners, Users and Employees

From: Tim McClung

Chief, Science Plans Branch

Office of Science and Technology

Subject: Amended: Changes to the North American Mesoscale (NAM)

Analysis and Forecast System: Rescheduled for No

Sooner than July 26, 2011

Amended to postpone the implementation until July 26, 2011. This allows time for full testing and integration work for this upgrade. We will issue another TIN if the implementation is rescheduled for a date later than July 26. Also amended to mention in the Output Product Changes section that the precision of accumulated precipitation output will be standardized across all forecast projections with this upgrade.

Effective Tuesday, July 26, 2011, beginning with the 1200 Coordinated Universal Time (UTC) run, the National Centers for Environmental Prediction (NCEP) will modify the North American Mesoscale (NAM) Analysis and Forecast System.

These changes include:

-Introducing a new modeling framework

-Installing a major upgrade to the prediction model

-Modifying the data analysis and assimilation system

-Adding to existing NAM products

-Adding new higher-resolution nests within the NAM including a

very high-resolution but small domain to support fire weather

and Incident Meteorologist (IMET) interests.

Details on the various changes are provided below, along with a notice about possible changes to product generation time.

Model Upgrades:

NCEP will introduce the use of the new NOAA Environmental Modeling System (NEMS), which is based on the tenets put forth by the Earth System Modeling Framework to which NOAA has subscribed. Eventually all of NCEP’s major modeling will be performed within NEMS. This NAM upgrade represents the first implementation of NEMS and a major step in the evolution of NCEP’s modeling suite.

The prediction model used in the NAM run will go from being the strictly regional Nonhydrostatic Mesoscale Model (NMM) to a new extended capability version now known as Nonhydrostatic Multiscale Model on B-grid (NMMB), which can be run either regionally or globally, and with or without embedded nests. This NEMS-NMMB will also serve as the prediction model running in the NAM Data Assimilation System (NDAS). Model changes/ enhancements in the NEMS-NMMB will include:

a) Native horizontal grid is an Arakawa staggered B-grid

(rotated 45 deg from the Arakawa E-grid in the WRF-NMM NAM)

b) New more conservative Eulerian advection scheme for passive

tracers like water vapor condensate fields

c) Generalized vertical coordinate

d) Modified vertical level distribution with more layers in the

stratosphere (14 layers above 200 mb instead of 7 in the

current operational NAM)

e) Boundary condition treatment changed to specify 5 boundary

rows instead of one

f) Microphysics changes to produce higher peak reflectivities

above 45 dBZ with higher peak surface rainfall rates in the

high-resolution nests and more realistic grid-scale cloud

fractions from cold, high cirru.

g) Change from USGS to MODIS_IGBP land-use definitions

h) Enhanced diffusion for specific humidity and cloud water

i) Run 5 high-resolution nested domains inside the 12km NAM

every cycle. These nests will run with greatly reduced

convective triggering, which improved quantitative

precipitation forecast (QPF) bias compared to using explicit

convection.

All model changes will also be applied to the Downscaled GFS by NAM Extension (DGEX) forecast system.

NDAS Changes:

a) Initial first guess at T-12hr will reflect relocation of

tropical cyclones

b) Will use 1/12 degree high resolution real-time sea surface

temperature (RTG_SST_HR) analysis instead of the 1/2th degree

real-time SST analysis.

c) Will update 2 m temperature and moisture and 10 m wind with

portion of first layer correction

Changes to the Gridscale Statistical Interpolation (GSI) analysis:

a) New faster version of the GSI code with new observation error

estimates, retuned background error covariances for NMMB and

upgraded radiative transfer (CRTM v2.0.2)

b) Assimilation of new observations: ACARS humidity, Windsat and

ASCAT (superob'ed Scatterometer winds over oceans), HIRS

radiances from NOAA-19, AMSU-A radiances from NOAA-19 and

AQUA, IASI radiances from METOP, GPS radio occultation

refractivity (COSMIC), RASS virtual temperatures, MAP

(boundary layer profiler) winds and MESONET surface

pressure/temperature/ humidity (winds already included)

c) Use dynamic reject list for surface mesonet data from the

NCEP Real-time Mesoscale Analysis (RTMA)

Changes to the NAM post-processing code:

a) The height and wind speed at the maximum wind level will be

computed by assuming the wind speed varies quadratically in

height in the neighborhood of the maximum wind level with the

search being capped at 100mb. The previous algorithm defines

maximum wind level as the level with the maximum wind speed

among all the model levels.

b) The static Tropopause level will be obtained by finding the

lowest level that has a temperature lapse rate of less than 2

K/km over a 2km depth above it. If no such level is found

below 50 mb, the Tropopause is set to 50 mb. The previous

algorithm defines the Tropopause by finding the lowest level

that has mean temperature lapse rate of 2 K/Km over three

model layers.

c) All Convective Available Potential Energy (CAPE), Convective

Inhibition (CIN), and Lifted Index (LI) variables in the NAM

output will be computed using virtual temperature instead of

sensible temperature. See the NWS Public Information

Statement issued January 12, 2011 for more details on

this change.

Users should be aware that this NAM upgrade will impact all downstream models and systems that use the NAM or NDAS as input.

Output Product Changes:

New NAM Nest runs, including placeable Fire Weather Nest:

Five new high-resolution nested domains will run inside the
12 km NAM every cycle:

a) CONUS (4 km resolution, 0-60 h)

b) Alaska (6 km resolution, 0-60 h)

c) Hawaii and Puerto Rico (both 3 km resolution, 0-60 h)

d) Placeable nest will run to 36-h inside either the CONUS nest

(at 1.33 km resolution) or Alaska nest (at 1.5 km

resolution). This nest is primarily for Fire Weather/IMET-DHS

Support (FWIS). The locations of this domain for each of the

4 NAM cycles will be determined via a daily coordination call

conducted by the NCEP Senior Duty Meteorologist.

A sample display of the domain coverage of these new nests is available at:

www.emc.ncep.noaa.gov/mmb/mmbpll/misc/nmmb_domains.png

Output grids from the NAM nest runs will be available on the NCEP ftp server immediately and on the NCEP NOMADS server in the future. The fields contained in the NAM nest output grids are listed at:

www.emc.ncep.noaa.gov/mmb/mmbpll/misc/sampleinv_namnests.html

Changes to parent NAM gridded output on the NCEP ftp server and the NWS ftp server:

a) In all NAM grids that contain roughness length, the precision

was changed to provide better decimal scaling because many

land-use types have roughness length much less than 1.

b) Surface slope type was dropped from all NAM output grids as

it is no longer used in the model land-surface physics

c) Time-averaged surface momentum flux record is being removed

from all NAM GRIB files as it is not defined and thus had

been set to zero in the current operational NAM

d) New output fields:

- Clear Air Turbulence (Ellrod Index), every 25 mb from

150-525 mb, and Inflight Icing every 25 mb from 300-600 mb,

every 50 mb from 650-950 mb, and 725 mb; added to grid

#221 (32 km grid over North America)

- 80 km above ground level pressure, temperature, wind, and

specific humidity; added to grid #221 (32 km grid over

North America), grid #218 (12 km grid over CONUS, pressure

file only) and grid #242 (11.25 km grid over Alaska,

pressure file only).

- Hourly max and min surface fields (10-meter wind, 2-meter

temperature, 2-meter relative humidity); added to grid

#221 (32 km grid over North America), grid #218 (12 km

grid over CONUS, both versions) and grid #242 (11.25 km

grid over Alaska).

- Haines Index: Added to grid #218 (12 km grid over CONUS,

both versions) and grid #242 (11.25 km grid over Alaska,

both versions)

- Ventilation Rate: Added to grid #218 (12 km grid over

CONUS) and grid #242 (11.25 km grid over Alaska).

- Rain and snow on lowest model level: added to grid #218

surface file "awip12"

- Thunder parameter (called lightning in GRIB): added to

both grid #218 files

e) All NAM output files on the native horizontal staggered

E-grid of the current operational WRF-NMM will be on the

staggered B-grid of the NEMS-NMMB. The current native grid

files with names "egrd3d," "edgawp," and "egrdsf" will be

removed from the NCEP FTP server and replaced with files with

names "bgrd3d", "bgdawp," and "bgrdsf," respectively. Users

who process current NAM native GRIB files with e-grid

staggering will need to modify their software to process

b-grid staggering.

f) To provide the critical variables used at Weather Forecast

Offices to generate their National Digital Forecast Database

(NDFD) forecast grids, NCEP will begin to populate the

current NAM Downscaled Numerical Guidance (DNG - a small set

of 2-dimensional fields) in the 0-60 hr range from the new

high-resolution NAM nested fields instead of the parent NAM

12 km fields. The NAM DNG grids are currently distributed to

CONUS, Alaska, Hawaii and Puerto Rico over the AWIPS

SBN/NOAAPORT. In response to requests from the NWS Regions,

NCEP also plans on producing a CONUS 2.5km NAM-DNG for the

0-60 hr in addition to the current CONUS 5 km version.

A separate TIN will announce the addition of those 2.5 km

grids to NOAAPORT.

g) Several users have noted differences in the precision of the

accumulated precipitation at different forecast projections.

With this upgrade, the precision for all forecast hours will

be standardized.

Product Delivery Time Change:

NCEP anticipates that output delivery times after the NAM upgrade will differ slightly throughout the run compared to the current operational NAM products. The precise amounts still need to come out of the final pre-implementation testing by NCEP Central Operations, but the following is the worst case scenario. When the CONUS Fire Weather nest is run during the first 36 hours of the forecast, product delivery will lag the current delivery by ~13 seconds each forecast hour such that
36 hour guidance will be 468 seconds or 7.8 minutes later than at present. Following the 36 hour point of the forecast, NWS will recover delivery time at roughly 10 seconds each forecast hour such that delivery of the 84 hr guidance will be at the same time as it is delivered today, which is 10 minutes earlier than its target. As an example, for 0000UTC run, the following delivery time differences would be expected, with current time in parentheses:

12hr PRODUCTS at 01:52:52 (01:50:16)

24hr PRODUCTS at 02:05:26 (02:00:14)

36hr PRODUCTS at 02:17:49 (02:10:01)

48hr PRODUCTS at 02:25:47 (02:19:59)

60hr PRODUCTS at 02:34:04 (02:30:16)

72hr PRODUCTS at 02:40:23 (02:38:35)

84hr PRODUCTS at 02:50:23 (02:50:35)

The target delivery for 84 hr guidance is 3:00:00.

When the fire weather nest is over Alaska, product delivery will lag the current delivery by ~5 seconds each forecast hour such that 36 hour guidance will be 180 seconds or 3 minutes later than at present.

For a detailed description of this NAM and NDAS upgrade, including verification statistics, please see:

www.emc.ncep.noaa.gov/mmb/mmbpll/misc/NAM_Q32011_Upgrade.pdf

For more general information about the NAM and NDAS, please see:

http://www.emc.ncep.noaa.gov/NAM/

A consistent parallel feed of data will become available on the NCEP server once the model is running in parallel on the NCEP Central Computing System by late May. The parallel data will be available via the following URLs:

http://www.ftp.ncep.noaa.gov/data/nccf/com/nam/para

ftp://ftp.ncep.noaa.gov/pub/data/nccf/com/nam/para

NCEP has tried to anticipate all filename and product content changes associated with this implementation, but if we discover additional changes during the course of the testing, we will send an amended version of this TIN with that information as soon as possible.

NCEP urges all users to ensure their decoders can handle changes in content order, changes in the scaling factor component within the product definition section (PDS) of the GRIB files, and volume changes. These elements may change with future NCEP model implementations. NCEP will make every attempt to alert users to these changes before implementation.

For questions regarding these changes, please contact:

Geoff DiMego

NCEP/Mesoscale Modeling Branch

Camp Springs, Maryland

301-763-8000 X 7221

Geoff.DiMego@noaa.gov

Eric Rogers

NCEP/Mesoscale Modeling Branch

Camp Springs, Maryland

301-763-8000 X 7227

Eric.Rogers@noaa.gov

For questions regarding the dataflow aspects of these datasets, please contact: